Additional equipment in the dry zone

TWO-STATION VACUUM CLEANER

Two-station vacuum cleaner with lighting and suction sensors. Controls and settings of the vacuum cleaner are made via the car wash main computer.

ADVANTAGES:
  1. convenient top feed (top point 3 m);
  2. straight pivoting arm 1800 mm with a spring (stainless steel), by means of which the hose is pulled up and does not touch the ground, which means it always stays clean;
  3. built-in sensors control the suction power, which is displayed on the car wash main tablet (the operator quickly responds to the problem);
  4. two replaceable nozzles included: slot-type (narrow) and piled (wide for large surfaces).
EQUIPMENT:
  • casing made of stainless steel AISI 304;
  • touch screen 21.5 ”, Full HD display;
  • microcomputer, power unit 12V;
  • B&R module (Austria) and Schneider circuit breakers (France);
  • PAX POS terminals are included as standard;
  • coin acceptor NRI (Germany), included as standard;
  • bill acceptors to choose from;
  • electric heating with a thermostat;
  • humidity sensor and temperature sensor;
  • electronic lock.

PROGRAM “AIR” TO THE VACUUM CLEANER

– for air blowing (drying) of hard-to-reach places of a car

EQUIPMENT:
  • casing made of stainless steel AISI 304;
  • touch screen 21.5 ”, Full HD display;
  • microcomputer, power unit 12V;
  • B&R module (Austria) and Schneider circuit breakers (France);
  • PAX POS terminals are included as standard;
  • coin acceptor NRI (Germany), included as standard;
  • bill acceptors to choose from;
  • electric heating with a thermostat;
  • humidity sensor and temperature sensor;
  • electronic lock.

PROGRAM “TURBODRYING” TO THE VACUUM CLEANER

Turbodrying is a strong flow of warm air, which is supplied by a turbine and a flexible heat-resistant hose with a flat nozzle at the end. It is convenient to dry large surfaces: car windows and the car body.

Technical characteristics:

Turbine with a capacity of 3000 watts and an efficiency of 318 m3/hour. A narrow slit nozzle allows you to achieve an air flow rate of up to 100 m/s.

ADVANTAGES OF TURBODRYING:
  • contactless, it eliminates the possibility of damage to the paintwork, the appearance of small scratches;
  • the cost of the service is lower than that of a Turbodrying at washing stations;
  • all forms of payment, including bonuses.

Turbodrying raises the average check at self-service car washes. Customers do not spare money if they get not only a clean, but also a dry car as a result.

ADDITIONAL EQUIPMENT AND ACCESSORIES

HANDWASH BASIN (STAINLESS STEEL)

A handwash basin, as well as a warm WC (with a washbasin), are a must at ALLES self-service car washes. Such little things form the attitude of customers to the car wash in general.

Dimensions: 320x440x1,060 mm. Foot pedal control.

MAT HOLDERS

Washer-clip (stainless steel) – a proprietary development of ALLES, holds the mats tightly even when washing in Turbo mode. In practice, it has proved to be a convenient and indestructible mechanism

ADVANTAGES OF DRY CLEANING COMPLEXES:
  • possibility of free access to 6 types of services without waiting in a queue;
  • the cost of services is lower than for similar services at washing stations;
  • all forms of payment, including bonuses;
  • involvement of the clients who have not used additional services before.

The dry cleaning multicomplex allows to cash in this area, because the margin of each of the listed programs is from 100 to 1,000%.